CAT6A Outdoor PUR Cable Reel: Planning a PoE++ Run

Match the reel to the run, not the speed label

A CAT6A outdoor cable reel solves a different problem from a fixed patch lead. You need a temporary or mobile Ethernet link that survives being laid out, taken up and stored repeatedly, often outdoors or across a venue floor. The reel is the deployment tool as much as the cable.

For PoE++ devices, the reel must carry both data and power. The supplied record for the CAT6A S/FTP outdoor installation link cable reel states support for PoE, PoE+, and PoE++. That is the key compatibility fact to confirm before you plan powered cameras, access points or displays. The record does not state a maximum PoE++ wattage or a maximum run length for power delivery, so treat those as limits to confirm with your equipment supplier rather than assumptions.

Four checks before you order a PoE++ reel

• Confirm the powered device accepts PoE++: The reel supports PoE, PoE+, and PoE++. Check the device and the power sourcing equipment both use the same PoE class. The reel does not add power negotiation.
• Choose 50 m or 90 m from the actual route: The reel is available in 50 m and 90 m lengths. Measure the path around obstacles, not the straight-line distance, and leave slack for connectors and drum placement.
• Check the jacket against your environment: The PUR outer jacket is described as resistant to abrasion, bending and environmental stress for indoor and outdoor use. It is not supplied with an IP rating, so do not assume it is submersible or suitable for permanent burial.
• Plan the connector interface: Integrated RJ45 faceplate connectors sit in the centre of the reel, so you do not need separate patch panels or couplers at the drum. Confirm the faceplate position works with your cable route and enclosure.

What the reel itself supplies

• CAT6A S/FTP Outdoor PUR Installation Link Cable Reel — 23AWG, PoE++: CAT6A S/FTP outdoor installation link cable reel with solid 23 AWG bare copper conductors and S/FTP double shielding. Shielding and conductor size are the construction facts that support signal integrity and EMI immunity in temporary outdoor or industrial runs.

  

• CAT6A S/FTP Outdoor PUR Installation Link Cable Reel — 23AWG, PoE++: Supports PoE, PoE+, and PoE++. This is the compatibility statement to match against your powered device and power sourcing equipment before planning a PoE++ run.
• CAT6A S/FTP Outdoor PUR Installation Link Cable Reel — 23AWG, PoE++: Mounted on a robust, lightweight PE + PC cable drum with integrated RJ45 faceplate connectors in the reel centre. The drum and centre faceplate reduce setup steps for exhibitions, control rooms, broadcast vehicles and emergency deployments.

Where S/FTP and PUR earn their place

S/FTP means each pair is shielded and the whole cable has an outer braid or foil screen. The supplied record describes S/FTP double shielding as providing high immunity to EMI and interference. That matters when a temporary run passes near motors, lighting rigs, broadcast equipment or other power cables. It does not replace separation from mains cabling or correct grounding, which the supplied information does not cover.

The PUR jacket is the other practical choice. A standard PVC patch cable can stiffen in cold and scuff when dragged over concrete or stage edges. The supplied record describes the PUR jacket as durable and resistant to abrasion, bending and environmental stress. That makes the reel a better fit for repeated deployment than a loose patch cable, but it does not make the cable indestructible. Avoid sharp edges, tight bends and vehicle traffic, and inspect the jacket before each use.

Reel versus fixed outdoor cable

The reel is designed for temporary or short-term LAN connections over extended distances, not as a permanent structured cabling install. Use the comparison to decide whether a reel is the right purchase.

• Deployment speed: The reel pays out and takes up as one unit with centre RJ45 faceplate connectors. Fixed cable needs terminations, trunking or conduit.
• Reuse: The reel is built for mobile and temporary use. A fixed outdoor run is usually cut to length and left in place.
• Environment: The PUR jacket is described for indoor and outdoor use. The supplied record does not confirm burial, direct sunlight or chemical resistance, so confirm those with the manufacturer if your route demands them.
• Length flexibility: The reel comes in 50 m and 90 m. If your route falls between those, plan the next length up and manage the excess rather than joining cables.

A practical planning sequence for a PoE++ run

1. 1. List every powered device and its PoE class: Write down whether each device needs PoE, PoE+ or PoE++. The reel supports all three, but the power source must match the device.
2. 2. Walk the route and measure: Include vertical drops, doorways, cable ramps and the position of the drum. Choose 50 m or 90 m from that measured path, not the room size.
3. 3. Check the RJ45 faceplate access: The connectors are in the centre of the reel. Make sure the drum can sit where you can reach the faceplate without straining the cable or blocking access.
4. 4. Confirm the environmental limits you need: The supplied record does not state an IP rating, temperature range or UV rating. If the run crosses a wet, hot or sun-exposed area, ask the supplier to confirm suitability before you buy.
5. 5. Order the length and quantity together: The record notes minimum order quantities apply and asks you to contact the supplier with required cable length and quantities for wholesale pricing. Plan spare capacity before you request a quote.

The trade-offs to accept

A reel is bulkier than a coiled patch cable and takes up floor or rack space. The 90 m option gives more reach but adds weight and handling effort. The integrated faceplate is convenient, but it fixes the connector location at the drum rather than at a wall plate, so your layout has to work around the reel.

The supplied record does not confirm a maximum PoE++ wattage, a maximum data run length for CAT6A, a cable diameter, a bend radius or a fire rating. Those are real decision limits, not reasons to avoid the product. If your project depends on any of them, ask for the full datasheet before committing. For many temporary exhibition, control room, broadcast vehicle and emergency deployments, the combination of S/FTP shielding, PUR jacket, 23 AWG copper and a mobile drum is the practical answer. The CAT6A S/FTP outdoor installation link cable reel is the specific model to compare against your route and power plan.