Back to Blog
How-to Guides 2026-11-20 Innov8 Wholesale Ltd 0 views

Mini SAS HD 8i to U.2 NVMe Cable: Setup Guide

Mini SAS HD 8i to U.2 NVMe Cable: Setup Guide

Learn how to connect two U.2 NVMe SSDs using a Mini SAS HD SFF-8643 8i to dual U.2 SFF-8639 cable with integrated power. Covers compatibility and physical setup.

What This Cable Does

The Mini SAS HD SFF-8643 8i to 2x U.2 SFF-8639 NVMe PCIe Cable with Dual Power connects a single high-lane Mini SAS HD host port to two U.2 NVMe solid-state drives. It uses a 72-pin Mini SAS HD connector on the host side and splits into two 68-pin U.2 (SFF-8639) connectors, delivering PCIe bandwidth to each drive. Two integrated SATA 15-pin power connectors supply dedicated power to each SSD, removing the need for separate power cables.

Cable Details at a Glance

Checking Compatibility Before You Connect

Before installing the cable, confirm that your host system has a free Mini SAS HD SFF-8643 8i interface. This is a 72-pin port, often found on enterprise server motherboards or PCIe storage cards. If your system lacks this port, the cable will not connect.

  1. Identify the host port: Look for a Mini SAS HD SFF-8643 8i (72-pin) receptacle on your motherboard or HBA. It is typically keyed to accept the cable's latching connector.
  2. Check U.2 drive compatibility: Each drive must have a U.2 (SFF-8639) 68-pin input. Most enterprise NVMe SSDs use this interface. The cable splits the host lanes to two drives.
  3. Verify power availability: The cable has two SATA 15-pin power connectors. Ensure your power supply has two free SATA power leads or use an adapter if needed.

Physical Setup

Once compatibility is confirmed, the physical connection is straightforward. The cable's latching Mini SAS HD connector provides a secure fit.

  1. Connect the host end: Align the 72-pin Mini SAS HD SFF-8643 8i plug with the host port and push firmly until the latch clicks. Do not force the connection; if it does not seat, check alignment.
  2. Attach the U.2 connectors: Plug each 68-pin U.2 (SFF-8639) end into a compatible NVMe SSD. The connectors are keyed to fit one way.
  3. Connect power: Attach each SATA 15-pin power connector to a free lead from your power supply. This powers the drives without additional cabling.

Where This Cable Fits Best

This cable is designed for enterprise servers, workstations, and high-density storage systems that use a Mini SAS HD host interface and U.2 NVMe drives. Its 0.8-metre length suits internal routing between a nearby host port and drive bays. The integrated power connectors keep the build tidy, and the PCIe Gen5 capability supports modern high-speed NVMe storage.

Related Articles

Customer Service
Home
Products
Cart
Profile