Back to Blog
Buying Guides 2026-11-16 Innov8 Wholesale Ltd 0 views

IX B Key to IX B Key CAT6A Cable: Specifying Shielded TPE Runs

IX B Key to IX B Key CAT6A Cable: Specifying Shielded TPE Runs

Specify the Innov8 IX B Key to IX B Key CAT6A shielded TPE cable with confidence: what the connector, shielding, and jacket facts confirm, and what to check before ordering custom lengths.

The connector pairing is the first filter

An IX B Key to IX B Key cable only works if both devices expose the same keyed IX Industrial interface. The Innov8 assembly terminates with IX B Key connectors, straight, on both ends. That makes it a direct link between two IX B Key ports, not a bridge to RJ45, M12 X-Code, or any other Ethernet connector.

The practical benefit is footprint. The IX Industrial connector system is compliant with IEC 61076-3-124 and uses a reduced footprint compared with RJ45, with metal latching and high vibration resistance. In dense control cabinets, machine vision enclosures, or compact I/O modules, that smaller interface can be the reason to standardize on IX B Key rather than force an RJ45 opening.

What the Innov8 IX B Key to IX B Key cable confirms

Shielding and jacket: match the cable to the environment

The S/FTP shield is the feature to weigh when the run passes near variable-frequency drives, servo amplifiers, or other noise sources. The supplied information describes the shield as protecting against electromagnetic interference and supporting consistent network integrity. That is a reason to choose shielded CAT6A over unshielded cable in a noisy cabinet, but it does not by itself define a bonding or grounding procedure for your installation.

The TPE jacket is the other environmental decision. Innov8 describes it as flexible, abrasion-resistant, and durable for installations where repeated handling or movement may occur. That wording supports use on a machine that is occasionally repositioned or on a cable that is handled during maintenance. It is not a statement of continuous-flex life, torsion performance, or drag-chain suitability, so if your application involves constant motion, confirm those requirements with the supplier before you commit to a length.

IX B Key to IX B Key vs other Ethernet interfaces

Use this comparison to decide whether the IX B Key to IX B Key assembly is the right interface for the job, not to rank one connector above another.

  • IX B Key to IX B Key (this cable): Best when both ends are IX B Key ports and you want the compact, latched, vibration-resistant IX Industrial interface. The straight terminations suit straightforward routing into compact modules.
  • IX Industrial to RJ45: A different assembly is needed if one end must land on an RJ45 switch or patch panel. This cable does not convert between the two.
  • M12 X-Code Ethernet: M12 X-Code is a separate circular connector system. Choose it when the equipment port is M12 X-Code, not IX B Key.
  • Field-terminated RJ45: RJ45 remains common on office-grade switches. If your industrial devices are IX B Key, keeping the run IX-to-IX avoids an adapter and preserves the smaller connector footprint.

How to specify a run before ordering

The supplied record confirms the connector, cable category, shielding, and jacket material. It does not list a fixed length, so treat length as a made-to-order decision rather than a stock option.

  1. 1. Confirm both ports are IX B Key: Check the keying on the device connectors. An IX B Key cable will not seat on a differently keyed IX Industrial port.
  2. 2. Measure the route, not just the straight-line distance: Include bends, cabinet entry, and service loops. The straight connectors need clearance at each end, especially in dense cabinets.
  3. 3. Decide whether the environment needs the shield: The S/FTP design is the reason to choose this cable in electrically noisy areas. If the run is short and quiet, an unshielded cable may be simpler, but this assembly is supplied shielded.
  4. 4. Confirm the movement profile: The TPE jacket supports flexibility and abrasion resistance. For continuous flex or drag-chain use, ask Innov8 to confirm suitability rather than assuming it from the jacket description.
  5. 5. Order the length as a custom configuration: Innov8 states that cable lengths and configurations are manufactured to order. Provide the exact length and connector configuration you need.

What the supplied information does not settle

The record does not list a maximum cable length for 10 Gbps operation, a temperature range, a bend radius, or a flex-life rating. Those are legitimate specification questions for an industrial run, but they are not answered by the supplied catalog facts. Ask Innov8 for the data you need rather than inferring it from the CAT6A category or the TPE jacket.

The record also does not confirm interoperability with specific switch brands or a particular industrial Ethernet protocol. The cable is described as suitable for factory automation, machine vision, industrial Ethernet switches, robotics, and compact I/O modules, but that is application guidance, not a compatibility guarantee. Verify the port keying and the equipment's own Ethernet specification before you order.

Related Articles

Customer Service
Home
Products
Cart
Profile