The pole count follows the signal, not the cable length
When you're specifying an M8 sensor cable, the first decision is how many conductors you need. The M8 3-pole vs 4-pole sensor cable question usually comes down to whether your sensor or actuator requires three wires or four. Both cables in Innov8's range are shielded, drag-chain rated, and built for industrial environments, but the extra pole in the 4-pole version opens up additional wiring options.
This comparison focuses on the two shielded M8 male-to-female assemblies from Innov8: the 3-pole (product 2428466) and the 4-pole (product 2428465). We'll look at what each offers and where the supplied specifications leave room for you to confirm compatibility.
3-pole vs 4-pole: the practical difference
The core difference is the number of available conductors. A 3-pole cable provides three signal paths, while a 4-pole cable provides four. That extra conductor can carry an additional signal, a separate power line, or a return path, depending on your device's wiring scheme.
- 3-pole M8 cable: Typically used for sensors with a simple three-wire interface (e.g., power, ground, signal). Choose this when your device's documentation specifies a 3-pin M8 connection and you don't need a fourth conductor.
- 4-pole M8 cable: Adds a fourth conductor for devices that require it, such as sensors with two outputs or actuators needing an extra control line. If your device has a 4-pin M8 port, this is the matching cable.
Shared electrical and mechanical limits
- M8 Male to M8 Female 3-Pole Sensor Cable – Shielded PUR Drag Chain Rated: Rated voltage: max 60V DC; nominal voltage: 300V; operating current per contact: max 4A; contact resistance: max 30 mΩ. These limits apply to the 3-pole cable and help you confirm it suits your circuit's voltage and current.

M8 Male to M8 Female 3-Pole Sensor Cable – Shielded PUR Drag Chain Rated - M8 Male to M8 Female 4 Pole Sensor Cable – Shielded PUR Drag Chain Rated: Rated voltage: max 60V DC; nominal voltage: 300V; operating current per contact: max 4A; contact resistance: max 30 mΩ. The 4-pole cable shares the same electrical ratings, so the choice between them is about conductor count, not power handling.

M8 Male to M8 Female 4 Pole Sensor Cable – Shielded PUR Drag Chain Rated - M8 Male to M8 Female 3-Pole Sensor Cable – Shielded PUR Drag Chain Rated: Operating temperature: flexible -30°C to +70°C; fixed -40°C to +80°C. Bending radius: mobile min. 15 x outer diameter; fixed min. 8 x outer diameter. These temperature and bend limits are critical for drag chain and continuous-motion installations.
- M8 Male to M8 Female 4 Pole Sensor Cable – Shielded PUR Drag Chain Rated: Operating temperature: flexible -30°C to +70°C; fixed -40°C to +80°C. Bending radius: mobile min. 15 x outer diameter; fixed min. 8 x outer diameter. The 4-pole cable matches the 3-pole in temperature range and bend radius, so routing constraints are the same for both.
Drag chain and torsion performance
Both cables are rated for drag chain use with approximately 5,000,000 bending cycles and 2,000,000 torsion cycles at ±180° per metre, with a maximum acceleration of 4 m/s². The PUR jacket provides flexibility, abrasion resistance, and resistance to oils and chemicals. The shielded construction helps maintain signal integrity in electrically noisy environments.
Because these specifications are identical for the 3-pole and 4-pole versions, you can base your decision on conductor count and device compatibility rather than mechanical endurance. If your application involves continuous movement, either cable is suitable, provided you respect the minimum bending radius.
Connector and environmental protection
- M8 Male to M8 Female 3-Pole Sensor Cable – Shielded PUR Drag Chain Rated: Connector A: M8 male, straight; Connector B: M8 female, straight; 3 poles; IP67-rated connectors. Confirms the 3-pole cable's straight male-to-female configuration and dust/water protection for demanding environments.
- M8 Male to M8 Female 4 Pole Sensor Cable – Shielded PUR Drag Chain Rated: Connector A: M8 male, straight; Connector B: M8 female, straight; 4 poles; IP67-rated connectors. The 4-pole cable offers the same connector style and IP67 rating, with one additional pole.
What the supplied information does not settle
The catalog does not include a detailed pinout (which conductor connects to which pin) for either cable. For M8 connector sensor wiring, you should always consult your device's manual to confirm the pin assignment and ensure the cable's wiring matches. The supplied records also do not specify compatibility with particular sensor brands or models, so verify the connector type (M8, 3-pin or 4-pin) and gender before ordering.
Additionally, the cables are supplied subject to minimum order quantities (MOQ), and wholesale pricing, volume discounts, and lead times are available upon request with your required lengths, colours, and quantities. Available lengths range from 0.3m to 20m, but the catalog does not list every length as a standard variant, so confirm availability when you enquire.
How to choose between the two
Use this quick checklist to decide which cable fits your application.
- Check your device's connector: Count the pins on the M8 port. If it has 3 pins, choose the 3-pole cable (2428466). If it has 4 pins, choose the 4-pole cable (2428465).
- Confirm the signal requirements: If your sensor or actuator needs more than three conductors (e.g., for an extra output or separate supply), the 4-pole cable provides the additional path.
- Verify voltage and current: Both cables are rated for max 60V DC and 4A per contact. Ensure your circuit stays within these limits.
- Plan for movement: For drag chain or continuous flexing, respect the minimum bending radius (15 x outer diameter for mobile use) and the temperature range (-30°C to +70°C flexible).
- Order with the right length: Available lengths are 0.3m to 20m. Contact Innov8 with your required length and quantity for a formal quotation, as MOQ applies.



