What This Cable Does
The Mini DIN 4 Pin to 5.5 x 2.1mm DC Power Cable is a short adapter that converts a Mini DIN 4-pin power connector into a standard DC barrel socket. If your device uses a Mini DIN power input and you need to connect it to a power supply with a 5.5 x 2.1mm DC plug, this cable bridges the two without cutting or soldering.
The cable is 0.15m (15cm) long, so it is designed to sit close to the device. It is not a long extension lead but a connector adapter.
Cable Details at a Glance
- Mini DIN 4 Pin to 5.5 x 2.1mm DC Power Cable 0.15m Male to Female Adapter: Mini DIN 4 pin male to 5.5 x 2.1mm DC female adapter cable. Also compatible with 5.5 x 2.5mm DC plugs. The 5.5 x 2.5mm compatibility means you can use it with many common DC barrel plugs, not only the exact 2.1mm size.

Mini DIN 4 Pin to 5.5 x 2.1mm DC Power Cable 0.15m Male to Female Adapter - Mini DIN 4 Pin to 5.5 x 2.1mm DC Power Cable 0.15m Male to Female Adapter: Built with 18AWG wiring for stable power delivery. 18AWG is a thicker gauge that supports moderate current without significant voltage drop—important for reliable power to electronics.
- Mini DIN 4 Pin to 5.5 x 2.1mm DC Power Cable 0.15m Male to Female Adapter: Compatible with devices using Mini DIN 4-pin power connectors including televisions, power supplies and various electronic equipment requiring a 5.5 x 2.1mm DC barrel connection. This confirms the cable is for devices that already have a Mini DIN 4-pin power input, not for converting other connector types.
Checking Compatibility Before You Buy
Before ordering, confirm two things: your device has a Mini DIN 4-pin power input, and your power supply has a 5.5 x 2.1mm (or 5.5 x 2.5mm) DC barrel plug. The cable is a female DC socket, so the power supply plug must be male.
The supplied information does not specify voltage or current ratings. You need to verify that your power supply delivers the correct voltage and enough current for your device. Using an incorrect power supply could damage equipment or cause unsafe operation.
Also, the cable is only 0.15m (15cm). If you need more reach between the power supply and the device, this cable alone will not provide it. You would need a separate extension cable.
A Practical Setup Sequence
1. Ensure the power supply is unplugged from the wall. 2. Connect the DC barrel plug of your power supply to the female DC socket of the adapter cable. 3. Connect the Mini DIN 4-pin male end of the adapter cable to the Mini DIN power input on your device. 4. Plug the power supply into the wall and turn on the device.
If the device does not power on, check that the power supply is rated for the device's voltage and that the connections are fully seated. The cable is straight-through wired (pin-to-pin), so no configuration is needed.
Where This Cable Fits Best
This adapter is useful for repair and custom projects where a device with a Mini DIN power input needs to be powered by a standard DC barrel supply. It is also handy when replacing a lost or damaged original power cable, as long as the replacement supply uses a 5.5 x 2.1mm or 5.5 x 2.5mm plug.
Because the cable is short and moulded, it adds minimal bulk and is suitable for tight spaces behind a TV or inside a cabinet.
What the Supplied Information Does Not Cover
The catalog does not provide a maximum current rating, voltage range, or operating temperature for this cable. Without that data, it is safest to assume the cable is intended for low-power electronics (e.g., displays, small power supplies) rather than high-current equipment. If your device draws several amps, consult the manufacturer before using this adapter.
No installation steps, safety warnings, or regulatory certifications are listed. Treat the cable as a passive adapter and always verify compatibility with your specific equipment.


